June 19, 2010

by admin

DYNO visit round 2

[singlepic id=701 w=640 h=480 float=none]

You may be asking yourself “Didn’t he just go to the dyno?”. Well you’re right but I needed to revisit to obtain some info.

The last time, I used the ECU with the AlphaN flash. Seeing as how I wanted to see if there was any difference between the factory tune and this supposed AlphaN tune, I had to go back for real figures.

This information will be valuable to anyone else running a euro S50 engine and thinking of going the AlphaN route.

Now that you know why I returned, I can get on with the info.

We did the following 4 runs:

Stock ECU with HFM connected.
Stock ECU without HFM connected.
AlphaN with HFM
AlphaN without HFM

The good news is that I had an even better run this time. On the first try the M3 put down 286 WHP. 🙂 Keep in mind this was done using the stock ECU.

I still feel that the AlphaN tune will only be beneficial once I install a new Carbon fiber airbox and or cams, but only time will tell.

[singlepic id=702 w=640 h=480 float=none]
[singlepic id=703 w=640 h=480 float=none]

105 thoughts on “DYNO visit round 2”

Leave a Reply

Your email address will not be published. Required fields are marked *